- Figure-8 cables for Aerial applications
on dedicated poles
- All Dielectric Self Supporting
(ADSS) cables suited for short, medium and long
span applications
- Customized cable designs
- FTTH Cable Solutions
- The above is a listing of
typical cable products that OFO manufactures. Please
contact the OFO engineering team for a wider selection
of cable designs.
SLEEK
The Compaq cable series
from OFO is a selection of Unitube cables in dielectric
and armored constructions. The cables are of low diameter
and light weight and typically suited for shot haul
LAN applications. Considering the low diameter the
cables are well suited for blowing applications and
in areas with constricted ducts.
EASY LAUNCH
The Easy Launch cable
series is a multi tube dielectric cable design suited
for short and long haul. The cable is suited for deployment
in ducts and can be installed by blowing / pulling
in to the ducts. A variation of this cable is thing
outer sheath of nylon-12 to provide termite resistant
properties.
In typical applications
requiring a rodent resistant non-metallic cable, OFO
can provide the Easy launch cable with rodent tape
along the cable periphery. Such cables are useful
lightening prone areas and for applications where
cable traceablility is not desirable.
LITE SHIELD
The Light Shield cable
series combines the need for a rigid steel armoring
and light weight. A single sheathing is provided to
keep the cable weight and diameter low. Typical applications
are deployment in ducts with added safety of rodent
protection, and for direct burial in soft soil areas.
SUPER SHIELD
The Super Shield cable
series is a rugged cable suited for direct burial
applications in harsh terrain. The double sheathing
and a corrugated steel tape armoring provides high
compressive strength and enhanced impact resistance.
Typically such cables are for a one time installation
along the route, and the rigid cable construction
ensures total protection of the cable. A variation
to the Super Shield cable is a triple sheath double
armored cable for enhanced compressive strength
FLAME SHIELD
The Flame Shield cable
series is a range of flame retardant sheathed cables
useful in cables that approach buildings, institutations
and premises susceptible to fire break outs. The sheathing
compound used in the Flame shield cable is chosen
based on the application and variations include Low
Smoke Zero Halogen sheathing and Flame Retardant sheathing.
Typical campus networks require cables that have the
ruggedness to withstand the rigors of outdoor installation
and at the same time are flame retardant as well.
OFO provides indoor outdoor cables in dielectric and
armored options.
SKY LINE
The Sky Line cable
series represents Aerial Cale options. Primarily two
options are provided:
- All Dielectric Self
Supporting (ADSS) cables for short, medium and long
span stringing along power lines
- Figure-8 cables
with steel messenger wire for support to string along
dedicated poles.
OFO has a high tensile
aramid yarn server to provide roque balanced aramid
yarn serving along cable periphery suited for long
span High Tensile ADSS cables. OFO can also assist
in selection of the right fittings to suit different
pole geometry, a vital factor in successful ADSS stringing.
In the section that
follows some of the construction and properties for
some of the major cable types produced at OFO is highlighted.
Please consult the OFO engineering team for the right
cable and fiber solution to suit your network |
